TILT & TURN

4700-series windows feature tilt & turn operation with multi-point locking hardware – because what is more important than security for you and your family?

One easy-to-operate handle moves the multi-point locking hardware into place and locks the window on all sides for higher security and a tighter seal.

With the handle in the “turn” position, the sash turns inwards at the side. This position allows for easy cleaning from the interior, rapid cross-ventilation, and quick emergency egress.

With the handle in the “tilt” position, the sash tilts inwards at the top, providing draft- free, secure ventilation.

By combining the six-chamber vinyl-fibreglass hybrid frame with the optional foam inserts and triple-pane insulating glazing, the 4700-series window system can achieve the thermal performance needed for a Passive House design. See ThermoPlus PHC for more information.

Profile

• Made from REHAU’s innovative vinyl-fibreglass material RAU-FIPRO®.
• This combination of uPVC and fibreglass provides the benefit of both materials:
  Like vinyl, its surface is smooth and pore-free, preventing the growth of mould and mildew. It can be extruded in a multi-chamber design with the corners fusion-welded to guarantee a permanent and leak-free connection.
  Its hybrid core provides the high stability, torsion stiffness, and static properties of fibreglass. What’s more, it is low maintenance, easy to clean, and has a low thermal expansion ratio.
• Outstanding light and weather resistance as well as colour durability
• After 10,000 hours of exposure in the Weather-Ometer, no change in colour is discernible, the notch impact strength is scarcely altered, and there is no visible change in surface gloss.
• High-impact resistant
• Essential during transportation and installation when window frames are subjected to bending and exposure to low external temperatures in winter. Under these conditions, cracking is much less likely with uPVC than with regular PVC.
• No plasticizers or lead
• 100% recyclable (where facilities exist)
• Won’t make your family sick
• Fusion-welded corners
• Corners are fusion welded for strength and to prevent air and water infiltration, as can happen with windows that are connected mechanically (e.g. fibreglass or aluminum windows).

• 6-chamber design
• Each chamber acts as a thermal break, providing insulation and high thermal performance.
• Thicker walls
• Give the doors more strength overall, and specifically in the corners, where more material means a better, stronger weld.
• Smooth surface for easy cleaning
• Extruded profiles are available in white only

Reinforcement

Because of the strength provided by the fibreglass in the profiles, most windows do not require additional reinforcement.

This makes ThermoPlus window lighter compared to other high-quality, steel-reinforced windows, making installation easier and faster.

Larger windows and doors are still reinforced with roll-formed galvanized steel that is fastened to the profiles to provide additional strength. Where reinforcement is required, thermal foam modules will not be possible in all chambers.

​

Seals

With its three surrounding seals – two compression gaskets and one centre seal – ThermoPlus offers the best possible insulation characteristics.

The highly elastic, stress-resistant flexible PVC seal material guarantees a long service life.

Hardware

• Multi-point locking hardware by ROTO FRANK
• Number of locking points increases with door size
• Seals out harsh weather
• Makes it virtually impossible for intruders to break into your home through the frame
• RotoSill Nano coating
• Offers the highest available surface protection. Through galvanizing, chromating, and additional sealing, the hardware becomes extremely scratch and corrosion resistant. If the surface is lightly scratched, the coating “heals” itself, continuing to provide protection against corrosion.
• Single-handle operation
• All locking points are simultaneously operated simply by the turn of a single handle
• Makes the door easy to operate even for children and people with limited mobility.

Glazing

• Comes standard with:
• 44mm triple-pane insulated glass unit (IGU)
• Two coatings of LoE 180
• Argon gas fill
• Warm edge SuperSpacer®
• The LoE 180 coating provides the higher SHGC (Solar Heat Gain Coefficient) desirable in Passive House design, paired with a low u-factor (heat loss rate). Other coatings may be chosen as needed.
• Because argon gas is heavier than air, it is a better insulator. Using argon gas between the glass panes results in less heat transfer, which means less moisture and ice buildup on the glass.
• The spacer that is used in the IGU also plays a very important role in how it performs. Metal spacers not only transfer much more heat, they also are more likely to fail, allowing the argon gas to escape, moisture to enter, and mold to grow. This is the reason why all EuroLine windows have a Super Spacer – a warm edge technology spacer that significantly improves glass performance. After a 5-year high-humidity test it was found that 99% of the argon was retained.
• Since EuroLine does not use glazing tape and dry glazes all units, glass replacement is fast and easy if it ever becomes necessary.
• In standard applications IGUs are glazed from the interior for security

AIR INFILTRATION

Windows are rated with respect to the rate of air infiltration per unit length of the window opening against winds at 40 km/h (25 mi/h).

A1: Lowest
A3: Highest
Test to CSA-A440 test sizes

WATER RESISTANCE

Windows are rated with respect to the rate of water sprayed against the window surface at different pressure levels.

B1: Lowest
B7: Highest
Test to CSA-A440 test sizes

WIND LOAD

The window is subjected to several levels of pressure applied inwards and outwards. To satisfy a given level of performance, the window must simultaneously fulfill both performance criteria.

C1: Lowest
C5: Highest
Test to CSA-A440 test sizes

FORCED ENTRY

The window frame is measured against forced entry.

F1: Lowest
F2: Highest
Test to CSA-A440 test sizes

EuroLine offers a variety of handle types to suit your specific window and door style. Please note that colors are approximations only. Colors available, but not shown, are: Black in the 100-series ROTO; White in the 200-series Verona.

WINDOW & PATIO DOOR 100-SERIES ROTO HANDLES

WINDOW & PATIO DOOR 200-SERIES VERONA HANDLES